Makita 9032 FUNCTIONAL DESCRIPTION

FUNCTIONAL

DESCRIPTION CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function on the

tool.

The arm can be pivoted and fixed at any desired angle within

the "A" range according to the operating position or the figure

of the workpiece.

Loosen the lock lever by raising it. Pivot the arm to the

desired position, and secure the lock lever to fix the arm

firmly.

By replacing the standard-equipped arm by optional one, 6

mm (1/4") or 13 mm (1/2") width belt can be used. Remove

the arm by loosening the screw that secures the arm. Insert

thearmthatfitsthebelttobeused,andtightenthescrew

firmly.

CAUTION:

• Before plugging in the tool, always check to see that the

switch trigger actuates properly and returns to the "OFF"

position when released.

To start the tool, simply pull the switch trigger. Release the

switch trigger to stop. For continuous operation, pull the

switch trigger and then push in the lock button. To stop the

tool from the locked position, pull the switch trigger fully, then

release it.

1. Lock lever

2. Arm

001215

"A" range

1. Screw

2. Arm

001216

1 2

1. Lock button

2. Switch trigger

001217