Makita 9046 ASSEMBL Y

ASSEMBLY CAUTION:

•Always be sure that the tool is switched off and

unplugged before carrying out any work on the tool.

For conventional type of abrasive paper with pre-

punched holes (standard equipment):

Turn the clamp lever to open the clamper. Insert the paper

end into the clamper, aligning the holes in the paper with

those in the pad. Then return the clamp lever to the original

position to secure the paper.

Repeat the same process for the other end of the tool, main-

taining the proper paper tension.

For hook-and-loop type of abrasive paper with pre-

punched holes (optional accessory):

Remove all dirt or foreign matter from the pad. Attach the

paper to the pad, aligning the holes in the paper with those in

the pad.

CAUTION:

•Always use hook-and-loop type of abrasive papers.

Never use pressure-sensitive abrasive paper.

1. Conventional type of abrasive

paper

2. Clamp lever

3. Pad

Open

003307

003309

1. Hook-and-loop type of abrasive

paper

2. Pad

003311