Installing side grip (auxiliary handle)
Screw the side grip on the tool securely. The side grip can be installedon either side of the tool, whichever is convenient.
Installing or removing depressed center wheel
CAUTION :
Always be sure that the tool is switched off the wheel.
Mount the inner flange onto the spindle. Fit the wheel on over the inner flange and screw the lock nut onto the spindle.
5
and unplugged before installing or removing
| Depressed |
| center wheel |
I | Inner flange |
To tighten the lock nut, press the shaft lock firmly so that the spindle cannot re- volve, then use the lock nut wrench and securely tighten clockwise.
_.
To remove the wheel, follow the installation procedure in reverse.
5
