Installingside grip (auxiliary handle) 5
Installing or removingdepressed center wheel
CAUTION :
Always be sure that the tool is switched off and unplugged before installing or removing the wheel.
Screw the inner flange onto the spindle. Hold the spindle with the wrench so that it cannot revolve, then use the lock nut wrench to secure the inner flange. Fit the wheel on over the inner flange and screw the lock nut onto the spindle.
Lock nut
Depressed center wheel
I
To tighten the lock nut, hold the spindle with the wrench so that it cannot revolve, then use the lock nut wrench and securely tighten clockwise.
To remove the wheel, follow the installation procedure in reverse.
5
