Makita 9557NB, 9556NB, 9558NB instruction manual Functional Description, Assembly

FUNCTIONAL DESCRIPTION

CAUTION:

•Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool.

Shaft lock

1. Shaft lock

1

005802

CAUTION:

•Never actuate the shaft lock when the spindle is moving. The tool may be damaged.

Installing side grip (handle)

005804

CAUTION:

•Always be sure that the side grip is installed securely before operation.

Screw the side grip securely on the position of the tool as shown in the figure.

Installing or removing wheel guard

(For depressed center wheel , multi disc / abrasive cut-off wheel , diamond wheel)

For tool with locking screw type wheel guard

Press the shaft lock to prevent spindle rotation when installing or removing accessories.

Switch action

1 1. Switch lever

005803

CAUTION:

•Before plugging in the tool, always check to see that the slide switch actuates properly and returns to the "OFF" position when the rear of the slide

switch is depressed.

To start the tool, slide the slide switch toward the "I (ON)" position. For continuous operation, press the front of the

1

3

2

005805

1

2

3

005807

WARNING:

1.Wheel guard

2.Screw

3.Bearing box

1.Wheel guard

2.Screw

3.Bearing box

slide switch to lock it.

To stop the tool, press the rear of the slide switch, then slide it toward the "O (OFF)" position.

ASSEMBLY

CAUTION:

•Always be sure that the tool is switched off and unplugged before carrying out any work on the tool.

•When using a depressed center grinding wheel/Multi-disc, flex wheel, wire wheel brush, cut-off wheel or diamond wheel, the wheel guard must be fitted on the tool so that the closed side of the guard always points toward the operator.

•When using an abrasive cut-off / diamond wheel, be sure to use only the special wheel guard designed for use with cut-off wheels. (In some European countries, when using a diamond wheel, the ordinary guard can be used. Follow the regulations in your country.)

8