How to use
Switch action
To start the tool, simply pull the trigger. Release the trigger to stop. For continuous operation without having to keep your finger on the trigger, just pull the trigger and then push in the lock button with your thumb. To stop the tool from lock posi- tion, just pull the trigger again and release
it.
Mounting belt
With the tool unplugged and the lever pulled out all the way, slip the belt over the rollers with the arrow direction on the belt the same as that of tool revolution (or belt life is shortened).
Belt adjustment
Flip sander over on i t s back and use the adjustment knob to obtain equal tension of belt over the front and back rollers.
Then plug in sander and switch it on, using the adjustment knob to center the belt as it runs over the rollers.
Failure to adjust belt porperly over rollers can result in frayed belt edges.
5
