MOUNTING OF HANDLE
CAUTION:
Before doing any work on the Brush Cutter/String Trimmer, always stop the engine and pull the spark plug connec-STOP tor off the spark plug.
Always wear protective gloves.
CAUTION:
Start the engine of Brush Cutter/String Trimmer after making sure that it is assembled completely.
For machines with U Handle models
-Place the
-Fit the groove of the
-Adjust the position of handle for easy and comfortable operation, and then tighten securely the four (4) hexagon socket bolts uniformly on the right and left with the wrench provided.
For machines with Loop Handle
-Fix a barrier to the left side of the machine together with the handle of operator’s protection.
-Do not adjust position of the loop handle too close to the control grip.
-The handle must be kept in position more than 250 mm from the hanger.
MOUNTING OF PROTECTOR
To meet the applicable safety provisions, only the tool/protector combinations as described in the table must be used.
Use genuine MAKITA cutter blades or nylon cutting head.
The cutter blade must be well sharpened, free of cracks or breakage. If the cutter blade hits against a stone during operation, stop the engine and check the blade immediately.
BCM2600 |
BCM3300 |
to Engine |
BCM2310/CA |
BCM2610/CA |
BCM3310/CA |
Star Blade | Eddy Blade | Protector for metal blades | Nylon cutting head | Protector for cord cutter |
20
Sharpen or replace the cutter blade every three (3) hours of operation.
If the nylon cutting head hits against a stone during operation, stop the engine and check the nylon cutting head immediately.
CAUTION:
The appropriate blade guard must always be installed for your own safety and complying with
8
