Makita BCM2610, BCM3310, BCM3300, BCM2310, BCM2600 instruction manual English

ENGLISH

Thank you very much for purchasing MAKITA Brush Cutter/String Trimmer. We are pleased to recommend to you the MAKITA Brush Cutter/String Trimmer which is the result of a long development program and many years of knowledge and experience. Please read this booklet which refers in detail to the various points that will demonstrate its outstanding perfor- mance. This will assist you to obtain the best possible result from your MAKITA Brush Cutter/String Trimmer.

Table of contents
SYMBOLS	4
SAFETY INSTRUCTIONS	5
TECHNICAL DATA	7
MOUNTING OF HANDLE	8
MOUNTING OF PROTECTOR	8
MOUNTING OF CUTTER BLADE OR NYLON CUTTING HEAD	9
FUELS/REFUELING	10
CORRECT HANDLING OF MACHINE	10
POINTS IN OPERATION AND HOW TO STOP	11
RE-SHARPENING THE CUTTING TOOL	11
SERVICING INSTRUCTIONS	12
STORAGE	13

EMISSIONS COMPONENT DEFECT WARRANTY COVERAGE

MAKITA U.S.A, Inc warrant to the initial retail purchaser and each subse- quent owner, that this utility equipment was designed, built, and equipped to conform at the time of initial sale to all applicable regulations of the U.S. Environmental Protection Agency (EPA), and that the engine is free of defects in materials and workmanship which would cause this engine to fail to conform with EPA regulations during its warranty period.

For the components listed under PARTS COVERED, the service dealer authorized by MAKITA will, at no cost to you, make the necessary diagno- sis, repair, or replacement necessary to ensure that the engine complies with applicable U.S. EPA regulations.

EMISSISON COMPONENT DEFECT WARRANTY PERIOD

The warranty period for this engine begins on the date of sale to the initial purchaser and continues for a period of 2 years.

PARTS COVERED

Listed below are the parts covered by the Emission Components Defect Warranty. Some of the parts listed below may require scheduled mainte- nance and are warranted up to the first scheduled replacement point for that part.

(1)Fuel Metering System

(i)Carburetor and internal parts

(ii)Fuel filter, if applicable.

(iii)Throttle stopper, if applicable.

(iv)Choke System, if applicable.

(2)Air Induction System

(i)Air cleaner plate

(ii)Air cleaner case

(3)Ignition System

(i)Spark plugs.

(ii)Flywheel Magneto

(iii)Ignition Coil.

(4)Miscellaneous Items Used in Above Systems

(i)Fuel hoses, clamps and sealing gaskets

OBTAINING WARRANTY SERVICE

To obtain warranty service, take your engine to the nearest MAKITA Fac- tory Service Center or service Center authorized by MAKITA. Bring your sales receipts indicating date of purchase for this engine. The dealer of service authorized by MAKITA will perform the necessary repairs or adjust- ments within a reasonable amount of time and furnish you with a copy of the repair order. All parts and accessories replaced under this warranty become the property of MAKITA.

WHAT IS NOT COVERED

•Conditions resulting from tampering, misuse, improper adjustment (unless they were made by the service dealer authorized by MAKITA dur- ing a warranty repair), alteration, accident, failure to use the recom- mended fuel and oil, or not performing required maintenance services.

•The replacement parts used for required maintenance services.

•Consequential damages such as loss of time, inconvenience, loss of use of the engine or equipment, etc.

•Diagnosis and inspection charges that do not result in warranty-eligible service being performed.

•Any non-authorized replacement part, or malfunction of authorized parts due to use of non-authorized parts.

2