WARNING:
MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury.
IMPORTANT SAFETY
INSTRUCTIONS
FOR BATTERY CARTRIDGE
1. | Before using battery cartridge, read all |
| instructions and cautionary markings on (1) |
| battery charger, (2) battery, and (3) product |
| using battery. |
2. | Do not disassemble battery cartridge. |
3. | If operating time has become excessively |
| shorter, stop operating immediately. It may |
| result in a risk of overheating, possible burns |
| and even an explosion. |
4. | If electrolyte gets into your eyes, rinse them |
| out with clear water and seek medical |
| attention right away. It may result in loss of |
| your eyesight. |
5. | Do not short the battery cartridge: |
3.Charge the battery cartridge with room temperature at 10 ﾟ C - 40 ﾟ C (50 ﾟ F - 104 ﾟ F). Let a hot battery cartridge cool down before charging it.
Symbols
The followings show the symbols used for tool.
･volts
･direct current
･no load speed
･ revolutions or reciprocation per minute
FUNCTIONAL DESCRIPTION
CAUTION:
•Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool.
Installing or removing battery cartridge
(1) | Do not touch the terminals with any |
| conductive material. |
(2) | Avoid storing battery cartridge in a |
| container with other metal objects such as |
| nails, coins, etc. |
(3) | Do not expose battery cartridge to water |
| or rain. |
| A battery short can cause a large current |
| flow, overheating, possible burns and |
| even a breakdown. |
1
2
3
009012
1.Red part
2.Button
3.Battery cartridge
6. | Do not store the tool and battery cartridge in |
| locations where the temperature may reach or |
| exceed 50 ﾟ C (122 ﾟ F). |
7. | Do not incinerate the battery cartridge even if |
| it is severely damaged or is completely worn |
| out. The battery cartridge can explode in a fire. |
8. | Be careful not to drop or strike battery. |
SAVE THESE INSTRUCTIONS.
Tips for maintaining maximum battery life
1.Charge the battery cartridge before completely discharged.
Always stop tool operation and charge the battery cartridge when you notice less tool power.
2.Never recharge a fully charged battery cartridge.
Overcharging shortens the battery service life.
•Always switch off the tool before insertion or removal of the battery cartridge.
•To remove the battery cartridge, withdraw it from the tool while sliding the button on the front of the cartridge.
•To insert the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it into place. Always insert it all the way until it locks in place with a little click. If you can see the red part on the upper side of the button, it is not locked completely. Insert it fully until the red part cannot be seen. If not, it may accidentally fall out of the tool, causing injury to you or someone around you.
•Do not use force when inserting the battery cartridge. If the cartridge does not slide in easily, it is not being inserted correctly.
4
