Makita BKP140, BKP180 Dust bag accessory, For tool without nozzle, For tool with nozzle

(A)Front base (Movable shoe)

(B)Rear base (Stationary shoe)

Correct setting			Although this side view cannot
	(A)	(B)	show it, the edges of the blades
			run perfectly parallel to the rear
			base surface.
Nicks in surface			Cause: One or both blades fails to
			have edge parallel to rear
			base line.
Gouging at start	(A)		Cause: One or both blade edges
		(B)	fails to protrude enough in
			relation to rear base line.
Gouging at end	(A)		Cause: One or both blade edges
		(B)	protrudes too far in relation
			to rear base line.
EN0004-1

Dust bag (accessory)

1. Fastener

1

2

011741

1.Nozzle

2.Dust bag

1

007802

When the dust bag is about half full, remove the dust bag from the tool and pull the fastener out. Empty the

For tool without nozzle

Remove the chip cover and install the nozzle (optional accessory). Attach the dust bag onto the nozzle . The nozzle is tapered. When attaching the dust bag, push it onto the nozzle firmly as far as it will go to prevent it from coming off during operation.

For tool with nozzle

Attach the dust bag onto the nozzle. The nozzle is tapered. When attaching the dust bag, push it onto the nozzle firmly as far as it will go to prevent it from coming off during operation.

dust bag of its contents, tapping it lightly so as to remove particles adhering to the insides which might hamper further collection.

NOTE:

•If you connect a Makita vacuum cleaner to this tool, more efficient and cleaner operations can be performed.

9