6

FUNCTIONAL

DESCRIPTION CAUTION:
•Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.

Switch action

CAUTION:
•Before plugging in the tool, always check to see that the
tool is switched off.
•Switch can be locked in “ON” position for ease of
operator comfort during extended use. Apply caution
when locking tool in “ON” position and maintain firm
grasp on tool.
To start the tool, slide the switch to the “ON ( I )” position. To
stop the tool, slide the switch to the “OFF (O)” position.
ASSEMBLY CAUTION:
•Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.

Installing or removing abrasive disc

To install the pressure-sensitive abrasive disc, first remove all
dirt or foreign matter from the pad. Then peel off the backing
paper from the abrasive disc and attach the abrasive disc to
the pad. Be careful to align the edges.
To remove the disc from the pad, just pull up from its edge.
1. Switch
1
003283
003298
003300