Makita BO6030 ASSEMBL Y

NOTE:

•The figure shows standard applications. They may differ

under certain conditions.

CAUTION:

•If the tool is operated continuously at low speeds for a

long time, the motor will get overloaded, resulting in tool

malfunction.

•The speed adjusting dial can be turned only as far as 5

and back to 1. Do not force it past 5 or 1, or the speed

adjusting function may no longer work.

ASSEMBLY CAUTION:

•Always be sure that the tool is switched off and

unplugged before carrying out any work on the tool.

Install the front grip on the tool so that its protrusions fit into

the matching notches in the front of the tool. Secure the front

grip using a screwdriver to tighten the screw through the hole

in the front grip.

CAUTION:

•Always use hook-and-loop system abrasive discs. Never

use pressure-sensitive abrasive discs.

To install the abrasive disc, first remove all dirt or foreign

matter from the pad. Then attach the abrasive disc to the

pad, using the hook-and-loop system of the abrasive disc

and the pad. Be careful to align the holes in the abrasive disc

with those in the pad.

To remove the disc from the pad, just pull up from its edge.

1. Notches

2. Front grip

3. Hole in front grip

4. Screwdriver

003738

1. Abrasive disc

003739