Makita DA3010F instruction manual Functional Description, Switch action

FUNCTIONAL DESCRIPTION

CAUTION:

•Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool.

	003795
	4
	5
	3
1	2

1.Lamp

2.Speed control screw

3.Switch lever

4.Higher

5.Lower

Switch action

CAUTION:

•Before plugging in the tool, always check to see that the switch lever actuates properly and returns to the “OFF” position when released.

To start the tool, simply squeeze the switch lever. Tool speed is increased by increasing pressure on the switch lever. Release the switch lever to stop.

A speed control screw is provided so that maximum tool speed can be limited (variable).

Turn the speed control screw clockwise for higher speed, and counterclockwise for lower speed.

	003796	Reversing switch action
1	1	CAUTION:
		• Always check the direction of rotation before operation.
		• Use the reversing switch only after the tool comes to a
A	B	complete stop. Changing the direction of rotation before
		the tool stops may damage the tool.

1. Reversing switch lever

This tool has a reversing switch to change the direction of

rotation. Move the reversing switch lever to the position

(A side) for clockwise rotation or the position (B side) for counterclockwise rotation.

Lighting up the lamps

CAUTION:

•Do not look in the light or see the source of light directly.

To turn on the lamp, start the tool. Then, the lamp lights up the top of the bit. To turn it off, stop the tool.

NOTE:

•Use a dry cloth to wipe the dirt off the lens of lamp. Be careful not to scratch the lens of lamp, or it may lower the illumination.

6