Makita EBH340R

DESIGNATION OF PARTS

GB DESIGNATION OF PARTS

1 Fuel Tank

2 Rewind Starter

3 Air Cleaner

4 I-O Switch (on/off)

5 Spark Plug

6 Exhaust Muffler

7 Handle

8 Control Lever

9 Control Cable

10 Shaft

11 Protector

12 Gear Case/Head Cas e

13 Cutter Blade

14 Shoulder Strap

15 Fuel Filter Cap

16 Starter K nob

17 Primmer Pump

18 Choke Lever

19 Exhaust Pipe

20 Oil Gauge

21 Flexible Pipe

22 Grip





Contents

Main SYMBOLS English SAFETY INSTRUCTIONS General Instructions 56 Personal protective equipment Starting up the brush cutter Refuelling Resting Transport Refuelling Maintenance Tool Repiacement 3m (10FT) Method of operation 12 2 Kickback Kickback prevention Cutting Tools Cutter blade (Star Blade (4 teeth), Eddy Blade (8 teeth)): First Aid When asking for help, please give the following informa- tion: Packaging TECHNICAL DATA Page ASSEMBLY OF ENGINE AND DRIVE SHAFT Control cable Round-hole End fitting Swivel Insert Page MOUNTING OF HANDLE MOUNTING OF PROTECTOR MOUNTING OF CUTTER BLADE Inspection and Refill of Engine Oil Point 2 in Replacement of Oil: If oil spills out BEFORE START OF OPERATION Handling of Fuel Storage Period of Fuel STORAGE OF MACHINE AND REFILL TANK Fuel WARNING: INFLAMMABLES STRICTLY PROHIBITED REFUELING STARTING A:Cold start High speed POINTS IN OPERATION AND HOW TO STOP Low speed (start position) Caburettor Primer Pump Caution during operation: B: Startup after warm-up operation RESHARPNING THE CUTTER BLADE Adjusting screw Carburetor SERVICING INSTRUCTIONS Daily checkup and maintenance Oil gauge Waste or paper REPLACEMENT OF ENGINE OIL CLEANING OF AIR CLEANER Points in Handling Air Cleaner Element CHECKING THE SPARK PLUG SUPPLY OF GREASE TO GEAR CASE Grease case CLEANING OF FUEL FILTER REPLACEMENT OF FUEL PIPE INSPECTION OF BOLTS, NUTS AND SCREWS STORAGE WARNING: When draining the fuel, be sure to stop the engine and confirm that the engine cools down. Fault location Attention after long-time storage Page TROUBLESHOOTING MEMO