27
Extract from the spare parts list
Use only original MAKITA parts. For repairs and
replacement of other parts, see your MAKITA service centre.
EK6100EK6101
Pos. MAKITA-No. Qty. Denomination
Synthetic resin cutting disc
1 966 121 150 1 Cutting disc for steel, dia. 300/20 mm
966 141 150 1 Cutting disc for steel, dia. 350/20 mm
966 144 150 1 Cutting disc for steel, dia. 350/25,4 mm
1 966 121 120 1 Cutting disc for masonry, dia. 300/20 mm
966 141 120 1 Cutting disc for masonry, dia. 350/20 mm
966 144 120 1 Cutting disc for masonry, dia. 350/25,4 mm
Diamond cutting disc
22 966 244 632 1 Cutting disc for masonry, dia. 350/25,4 mm
3 994 290 250 1 Hex screw M8x25
4 965 300 501 1 V-belt (EK6100)
965 300 510 1 V-belt (EK6101)
5 963 601 122 1 Suction head
6 315 114 350 1 Tank cap, compl. (fuel)
8 315 173 020 1 Inner Þ lter
9 315 173 010 1 Air Þ lter insert (paper cartridge)
10 395 405 000 1 Disk 5
11 965 603 021 1 Spark plug
12 395 164 010 1 Starter cable ø 3,8x1000 mm
13 181 164 010 1 Starter grip
14 181 163 050 1 Return spring in housing
15 181 163 080 1 Spring
16 181 163 090 1 Driver
17 941 719 131 1 Universal wrench SW 13/19
18 940 827 000 1 Offset screwdriver T27
19 944 340 001 1 Screwdriver (carburetor)
Accessories (not delivered with the Power Cut)
Diamond cutting disc
22 966 . . . . . . 1 Please consult your MAKITA dealer!
26 957 802 600 1 Pressure water tank, cpl.
- 949 000 035 1 Combined can (for 5l fuel, 2.5l oil)
EU Conformity Declaration
The undersigned, Tomoyasu Kato, as authorized by MAKITA Corporation, declare that the MAKITA machines,
Type: 315
Power Cut EK6100, EK6101
manufactured by MAKITA Corporation, 3-11-8 Sumiyoshi-Cho, Anjo, Aichi, 446-8502 Japan, conforms to the basic safety and health
requirements of the applicable EU Directives:
EU Machinery Directive 2006/42/EG, EU EMC Directive 2004/108/ EG, Outdoor Noise Directive 2000/14/EG.
The most important standards applied to properly meet the requirements of the above EU Directive were: EN 19432, CISPR 12,
EN ISO 14982, DIN EN 61000-4.
The conformity assessment procedure 2000/14/EG was performed per Annex V. The measured noise level (Lwa) is 114 dB(A).
The guaranteed noise level (Ld) is 115 dB(A).
The technical documentation is on Þ le at MAKITA International Europe Ltd., Michigan Drive, Tongwell, Milton Keynes, Bucks, MK15
8JD, England.
Anjo, 20.8.2012 for MAKITA Corporation
Tomoyasu Kato
Managing Director