MOUNTING OF HANDLE FOR EM4340L
CAUTION: Before doing any work on the brush cutter, always stop the engine and pull the spark plug connector off the spark plug.
Always wear protective gloves!
CAUTION: Start the brush cutter only after having assembled it completely.
–Place the handle with throttle lever on the handle holder in such a manner that it will be on the right side (to be held by the right hand) viewed from the engine side.
–Provisionally fix the upper side of the handle holder with the attached bolt (1).
–Adjust the handle to an angle easy to manipulate, and fix it by the bolt.
–Fix the control cable by three clips (2).
Note: If the control cable is not kept tight, it may be caught by a twig, leading to an accident.
(1)
Clips (2)
8
