Makita GE0600 OPERATION, MAINTENANCE

OPERATION

Turn the tool on without the wheel point making any contact

with the workpiece and wait until the wheel point attains full

speed. Then apply the wheel point to the workpiece gently.

To obtain a good finish, move the tool in the leftward direc-

tion slowly.

CAUTION:

•Apply light pressure on the tool. Excessive pressure on

the tool will only cause a poor finish and overloading of

the motor.

When the wheel point becomes “loaded” with various bits

and particles, you should dress the wheel point with the

dressing stone.

MAINTENANCE CAUTION:

•Always be sure that the tool is switched off and

unplugged before attempting to perform inspection or

maintenance.

To maintain product SAFETY and RELIABILITY, repairs,

carbon brush inspection and replacement, any other mainte-

nance or adjustment should be performed by Makita Autho-

rized or Factory Service Centers, always using Makita

replacement parts.

003855

1. Dressing stone

003856