Makita Grinder 9077SL AC C E S S O R I E S

When the resin insulating tip inside the carbon brush is

exposed to contact the commutator, it will automatically shut

off the motor. When this occurs, both carbon brushes should

be replaced. Keep the carbon brushes clean and free to slip

in the holders. Both carbon brushes should be replaced at

the same time. Use only identical carbon brushes.

Use a screwdriver to remove the brush holder caps. Take out

the worn carbon brushes, insert the new ones and secure

the brush holder caps.

To maintain product SAFETY and RELIABILITY, repairs, any

other maintenance or adjustment should be performed by

Makita Authorized or Factory Service Centers, always using

Makita replacement parts.

ACCESSORIES CAUTION:

•These accessories or attachments are recommended for

use with your Makita tool specified in this manual. The

use of any other accessories or attachments might

present a risk of injury to persons. Only use accessory

or attachment for its stated purpose.

•Your tool is supplied with a guard for use with a

depressed center grinding wheel, multi-disc, flex wheel

and wire wheel brush. If you decide to use your Makita

grinder with approved accessories which you purchase

from your Makita distributor or factory service center, be

sure to obtain and use all necessary fasteners and

guards as recommended in this manual. Your failure to

do so could result in personal injury to you and others.

If you need any assistance for more details regarding these

accessories, ask your local Makita service center.

1. Commutator

2. Insulating tip

3. Carbon brush

001146

1. Brush holder cap

2. Screwdriver

001155