For all grounded tools with American type plug.
GROUNDING INSTRUCTIONS: Thistool should be grounded while i n use to protect the operator from electric shock. The tool i s equipped with a threetonductor cord and
An adapter Fig. "B' and "C" i s available for connecting Fig. "A" type plugs t o
Grounding Blade | Cover of Grounded Outlet Box |
ADDITIONAL SAFETY RULES
1.Wear a hard hat (safety helmet) and an ear protector if necessary.
2.Be sure the bit is secured in place before operation.
3.Under normal operation, the tool is designed t o produce vibration. The screws can come loose easily, causing a breakdown or accident. Check tightness of screws carefully before operation.
4.In cold weather or when the tool has not been used for a long time, let the tool warm up for several minutes by operating it under no load. This will loosen up the lubrication. Without proper
5.Always be sure you have a firm footing.
Be sure no one is below when using the tool in high locations.
6.Hold the tool firmly with both hands. Always use the side grip.
7.Keep hands away from moving parts.
8 . Do not leave the tool running. Operate the tool only when
9.Do not point the tool at any one in the area when operating. The bit could fly out and injure someone seriously.
IO. When chipping into walls, floors or wherever "live" electrical wires may be encountered, DO NOT TOUCH ANY METAL PARTS OF THE TOOL! Hold the tool only by the plastic handle or the side grip t o prevent electric shock if you chip into a "live" wire.
11.Do not touch the bit or parts close t o the bit immediately after operation; they may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
4
I
