SERVICE NOTE
Follow these steps when replacing the Inner Housing Com and the Change Plate.
1. Remove Gear Housing Cover.
2. Remove Tool Holder section.Fig. 1 3. Remove two M4x12 Hex. Socket Head Bolts. (Fig. 1)
4. Remove Shaft portion and Piston Cylinder. (Fig. 2) | Fig. 2 |
|
5. Remove Change Plate. (Fig. 3) | Fig. 3 |
|
6. Remove | Fig. 4 |
All steps for removal of | Fig. 6 |
|
7.Replace the current Inner Housing complete by the new one.
8.Apply 5g of Makita Grease RA No.1 as (Fig. 6)
4 Model HR2450
