Makita HR2450F Selecting action mode

This tool has a reversing switch to change the direction of

rotation. Move the reversing switch lever to the position

(A side) for clockwise rotation or to the position (B side)

for counterclockwise rotation.

Selecting action mode

CAUTION:

•Do not rotate the action mode changing knob when the

tool is running under load. The tool will be damaged.

•To avoid rapid wear on the mode change mechanism, be

sure that the action mode changing knob is always

positively located in one of the three action mode

positions.

Rotation with hammering

For drilling in concrete, masonry, etc., depress the lock but-

ton and rotate the action mode changing knob to the

symbol. Use a tungsten-carbide tipped bit.

Hammering only

For chipping, scaling or demolition operations, depress the

lock button and rotate the action mode changing knob to the

symbol. Use a bull point, cold chisel, scaling chisel, etc.

Rotation only

For drilling in wood, metal or plastic materials, depress the

lock button and rotate the action mode changing knob to the

symbol. Use a twist drill bit or wood bit.

1. Rotation with hammering

2. Lock button

3. Action mode changing knob

003573

1. Hammering only

003574

1. Rotation only

003575