ACCESSORIES
Wipe out the old grease inside and replace with a fresh grease (60 g; 2 oz). Use only Makita genuine hammer grease (optional accessory). Filling with more than the spec- ified amount of grease (approx. 60 g; 2 oz) can cause faulty hammering action or tool failure. Fill only with the specified amount of grease.
Reinstall the crank cap and tighten with the lock nut wrench.
CAUTION:
•Do not tighten the crank cap excessively. It is made of resin and is subject to breakage.
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts.
CAUTION:
•These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
If you need any assistance for more details regarding these accessories, ask your local Makita service center.
• Spline shank
• Bull point
• Cold chisel
• Scaling chisel
• Grooving chisel
• Spline shank to
• Spline shank to SDS adapter
• Core bit
• Core bit adapter
• Hammer grease
• Depth gauge
•
• Safety goggles
• Lock nut wrench 35
• Hex wrench
• Plastic carrying case
13
