Switch action
To start the tool, move the slide switch forward, and the slide switch will lock in the "ON" position. To stop, lightly depress the rear of the slide switch, and it will re- turn to the "OFF" position.
CAUTION :
Before plugging in the tool, always check to see that the slide switch actuates pro- perly and returns to the "OFF" position when depressed.
7Slide switch
r- I
Operation
Turn the tool on and set the front ends of the side blades on the workpiece. Now simply move the tool forward, keeping the side blades flush with the workpiece surface.
CAUTION :
When cutting a small portion of the work- piece, you may have difficulty complet- ing the end of the cut. In that case, try to cut it again, pulling the workpiece back slightly.
5
