Operation

When cutting with this tool, the thickness of the blade is cut as well. Therefore, your cutting line should be on either the left or right side of the groove in the kerf board. Switch on the tool and wait until the blade attains full speed before lowering gently into the cut. When the blade contacts the workpiece, gradually bear down on the handle to perform the cut. When the cut is completed, switch off the tool and WAIT UNTIL THE BLADE HAS COME TO A COMPLETE STOP before returning the balde to i t s fully elevated position. A thin- cut piece could otherwise contact the coasting blade and be thrown around dan- gerously.

Fence plate

The fence plate is designed to prevent smaller cutting scraps from jamming inside the blade case. The fence plate moves right or left automatically as the turn base is rotated.

Wood facing

Use of wood facing helps to assure splinter- free cuts in workpieces. Attach a wood facing to the guide fence using the holes in the guide fence.

CAUTION :

Use straight wood of even thickness as the wood facing.

 

 

'3'8"'

 

(17- - - -70-mmf

*See the fiqure below concerning the dimensions of

a suggested wood facing.

 

Over

I I

I

450 mm

 

I

 

 

10 mm+

le-

-Over

-3/4")-

 

 

 

1

 

 

 

 

0 - - - - - - - - -

 

 

 

 

 

 

35

mm (2 - 3/4")

 

 

 

 

 

 

- - - - - -

-4-

 

 

 

 

 

 

(1

3/8")

 

 

 

k 1 0 2 mm-102

mm+

 

 

 

 

I

(4")

,

(4")

I

 

 

Use screws to attach the wood facing to the guide fence. The screws should be installed so that the screw heads are below the surface of the wood facing.

11

Page 10 Page 12
Page 11
Image 11
Makita LS1020 instruction manual Operation
Page 10 Page 12

LS1020 specifications

The Makita LS1020 is a powerful and versatile compound miter saw designed to handle a variety of cutting tasks with precision and ease. Known for its robust build and advanced features, the LS1020 is an ideal choice for both professional contractors and DIY enthusiasts.

One of the standout features of the LS1020 is its 10-inch blade. This allows for a maximum crosscut capacity of 12 inches, making it capable of handling wider materials effortlessly. The saw is powered by a 15-amp motor, delivering an impressive no-load speed of up to 5,000 RPM. This high-speed capability ensures clean and smooth cuts, reducing the need for additional finishing.

The LS1020 is equipped with an innovative miter angle range of 0 to 45 degrees to the left and right, allowing users to make precise miter cuts for a variety of applications. Additionally, the saw features a bevel range of 0 to 45 degrees, with positive stops at commonly used angles, simplifying the setup process for angle cuts.

User convenience is a priority in the design of the LS1020. The large table provides a stable work surface, and its extension wings offer additional support for larger workpieces. The saw also includes a built-in laser guide, which enhances accuracy by projecting a clear line onto the workpiece, ensuring that cuts are made exactly where intended.

Safety features are integrated into the LS1020 design to protect users during operation. A protective blade guard ensures that the saw blade is covered when not in use, while the electric brake stops the blade swiftly once the power switch is turned off. Additionally, the saw is designed with rubberized grips for secure handling and control.

Running on a direct drive system, the LS1020 minimizes vibration, enhancing both cutting precision and comfort during extended use. This saw's lightweight construction, combined with a carry handle, makes it easy to transport to different job sites.

In summary, the Makita LS1020 stands out as a reliable and efficient tool in the realm of compound miter saws. With its powerful motor, versatile cutting capabilities, user-friendly features, and safety measures, it is well-suited for a variety of woodworking projects, making it a valuable addition to any tool collection.
Top Page Image Contents