Makita RBC2510, RBC2500 Never straighten or weld damaged cutting tools, First Aid, Packaging

Never straighten or weld damaged cutting tools.

–Operate the Brush cutter/String trimmer with as little noise and contamination as possible. In particular check the correct setting of the carburetor.

–Clean the Brush cutter/String trimmer at regular intervals and check that all screws and nuts are well tightened.

–Never service or store the Brush cutter/String trimmer in the vicinity of naked flames.

–Always store the Brush cutter/String trimmer in locked rooms and with an emptied fuel tank.

Observe the relevant accident prevention instructions issued by the relevant trade associations and by the insurance companies.

Do not perform any modifications on the Brush cutter/String trimmer as this will endanger your safety.

The performance of maintenance or repair work by the user is limited to those activities as described in the instruction manual. All other work is to be done by an Authorized Service Agent. Use only genuine spare parts and accessories released and supplied by MAKITA.

Use of non-approved accessories and tools means increased risk of accidents.

MAKITA will not accept any liability for accidents or damage caused by the use of non-approved cutting tools and fixing devices of cutting tools, or accessories.

First Aid

In case of accident make sure that a first-aid box is available in the vicinity of the cutting operations. Immediately replace any item taken from the first aid box.

When asking for help, please give the following information:

–Place of accident

–What happened

– Number of injured persons

–Kind of injuries

–Your name

Packaging

The MAKITA Brush cutter/String trimmer will be delivered in two protective cardboard boxes to prevent transport damage. Cardboard is a basic raw material and is therefore consequently reusable or suitable for recycling (waste paper recycling).

EU Conformity Declaration

The undersigned, Yasuhiko Kanzaki, as authorized by MAKITA INTERNATIONAL EUROPE LTD., Michigan Drive, Tongwell, Milton Keynes, Bucks MK15 8JD, U.K., declare that the Makita Machines,

Type : RBC2500, RBC2510

manufactured by Robin conforms to the basic safety and health requirements of the applicable EU guidelines:

EU Machine guideline 98/37/EG

EU EMC guideline 89/336/EWG (modified by 91/263/EWG, 92/31/EWG and 93/68/EWG)

Noise Emission guideline 2000/14/EC

The most important standards applied to properly meet the requirements of the above EU guidelines were: EN 11806, CISPR 12, EN50082-1, DIN VDE 0879 T1.

Technical Documentation: Fuji Robin Industries Ltd.

35 OHOKA, NUMAZU - CITY, SHIZUOKA - PREF, 410-8535 JAPAN

Hiroshi Hirooka

General Manager, Engineering Department

Guaranteed Sound Power :114 dB

Measured Sound Power : 110 dB

Milton Keynes, 01.02.03

For MAKITAINTERNATIONALEUROPE LTD.

Yasuhiko Kanzaki

Managing Director

5