Dust nozzle set (Accessory)
1
2
1.Dust nozzle
2.Thumb screw
009754
Use the dust nozzle for dust extraction. Install the dust nozzle on the tool base using the thumb screw so that protrusion on the dust nozzle fit to the notch in the tool base.
Then connect a vacuum cleaner to the dust nozzle.
009755
MAINTENANCE
CAUTION:
•Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance.
•Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may
result.
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts.
OPTIONAL ACCESSORIES
CAUTION:
• These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
If you need any assistance for more details regarding these accessories, ask your local Makita Service Center.
•Straight & groove forming bits
•Edge forming bits
•Laminate trimming bits
•Straight guide
•Templet guide 25
•Templet guides
•Templet guide adapter
•Lock nut
•Collet cone 3/8", 1/4"
•Collet cone 6 mm, 8 mm
•Wrench 13
•Wrench 22
•Dust nozzle set
8
