Installing or removing battery cartridge

Always switch off the tool before insertion or removal of the battery cartridge.

0 To remove the battery cartridge, pull out

I

 

the s e t plate on the tool and grasp both

Batterv cartridqe

sides of the cartridge while withdrawing

 

 

it from the tool.

 

 

*To insert the battery cartridge, align the

 

 

tongue on the battery cartridge with the

 

 

groove in the housing and slip it into

 

 

place. Snap the set plate back into place.

 

 

Be sure to close the set plate fully before

 

 

using the tool.

 

 

0 Do not use force when inserting the battery cartridge.

If the cartridge does not slide in easily, it is not being inserted correctly.

Charging

Plug the fast charger into your power

source. Insert the battery cartridge so thatkStart button the plus and minus terminals on the bat-

tery cartridge are on the same sides as their respective markings on the fast charger. Insert the cartridge fully into the port so that it rests on the charger port floor.

Press the start button (red). The charging light will come on and charging will begin.

If the charging light does not come on, press the reset button (yellow)first, then the start button (red). If the charging light goes out within 10 seconds even after pressing the reset button and start button a couple of times, the battery cartridge is dead. (CAUTION : Wait for more than 5 seconds after the charging light goes out to press the reset button again.) Replace it with a new one. When the charging light goes out after about one hour, you may remove the fully charged battery cartridge.

After charging, unplug the charger from the power source.

CAUTION :

0Your new battery cartridge is not charged. You will need to charge it before use.

.Do not keep the button pressed in with tape, etc. or the circuit will not function pro- perly. Also, a malfunction of the charger may result possibly causing overheating, etc.

If you try to charge a cartridge from a just-operated tool, sometimes the charging light will not come on. If this occurs, let the cartridge cool off for a while. Then re-insert it and try to charge it once more.

0 When you charge a new battery cartridge or a battery cartridge which has not been used for a long period, it may not accept a full charge. This i s a normal condition and does not indicate a problem. You can recharge the battery cartridge fully after discharging it almost completely a couple of times.

0 If you wish to charge two battery cartridges, allow 15 minutes between chargings on the fast charger.

7

Page 6 Page 8
Page 7
Image 7
Makita T221D instruction manual Batterv cartridqe
Page 6 Page 8

T221D specifications

The Makita T221D is a versatile and powerful cordless impact wrench designed for both professional and DIY enthusiasts. Known for its robust performance and innovative technologies, this tool delivers exceptional efficiency, making it ideal for a wide range of applications.

One of the standout features of the Makita T221D is its 18V LXT battery platform. This powerful battery provides long runtime and fast charging capabilities, ensuring that users can work for extended periods without interruption. The efficient energy management system optimizes battery performance and extends its lifespan, allowing users to get the most out of their investment.

The T221D is equipped with a brushless motor, which significantly enhances its operational efficiency. This motor not only prolongs the tool's life by reducing wear and tear but also increases its power output and torque. The brushless design means less heat is generated during operation, contributing to a cooler running tool and a more comfortable user experience.

Another notable feature is the tool’s compact design and lightweight construction. Weighing in at just a few kilograms, this impact wrench is easy to handle and maneuver, allowing users to access tight spaces with ease. Its ergonomically designed grip ensures comfort during prolonged use, minimizing operator fatigue.

In terms of performance, the Makita T221D boasts an impressive maximum torque rating, making it suitable for heavy-duty tasks such as automotive repair and construction projects. It features multiple speed settings and a variable speed trigger, giving users full control over their work and allowing for precision in delicate applications.

The inclusion of an LED work light adds to the tool's practicality, illuminating dark work areas and enhancing visibility. This is particularly beneficial for professionals who often work in less than ideal lighting conditions.

Overall, the Makita T221D combines power, efficiency, and user-friendly features, making it an excellent choice for anyone in need of a reliable impact wrench. With its advanced technologies and robust build, it stands out in the market as a leading tool that can handle a variety of challenging tasks and projects with ease. Users can count on the T221D for both its performance and durability, ensuring a worthwhile addition to any toolkit.
Top Page Image Contents