K00019 STACKING KIT E-1100 & G-1700
| Installation Instructions |
| |
Parts List: | Description | Quantity | Part Number |
Item | |||
1. | Lower Ice Chute Weldment (one with insulation) | 2 | 6605514 |
2. | Upper Ice Chute Weldment | 2 | 6605414 |
3. | Front Chute Support | 1 | 6608614 |
4. | Top Front Mounting Bracket | 1 | 6605614 |
5. | Bottom Front Mounting Bracket | 1 | 6605714 |
6. | Bottom Rear Mounting Bracket (Angle ) | 2 | 6213314 |
7. | Top Rear Mounting Bracket (90 ∟) | 2 | 6213214 |
8. | Water Shield Weldment | 1 | 6653414 |
9. | Stabilizer Bracket | 1 | 6611814 |
10. | 1 | 5027021 | |
11. | 2 | 5031841 | |
12. | 14 | 5202053 | |
13. | 6 | 5202103 | |
14. | 1 | 5429431 | |
15. | 2 | 5429531 | |
16. | 12 | 5489021 | |
17. | 1/4 Split Ring Lock Washer | 2 | 5545111 |
18. | #10 Split Ring Lock Washer | 1 | 5573163 |
19. | Installation Instructions | 1 | 8001953 |
20. | Locking Plate | 1 | 6236814 |
21. | Foam Tape | 250” | 9202393 |
22. | Corner Brace | 1 | 6604714 |
Installation Instructions:
1.The K019 stacking kit is used for stacking two
2.INSTALLATION OF CORNER BRACE:
A.Remove foam tape, as shown on Illustration 1.
B.Remove seven screws on the top of the bin and locate corner brace, as shown in Illustration 1. Secure with seven screws previously removed.
C.Use foam tape from kit around the perimeter of corner brace, as shown in Illustration 1.
3.INSTALLATION OF MACHINES:
A.See service manual for uncrating and inspection of both machines.
B.Remove top cover from lower machine.
C.Set machine carefully and squarely on bin.
D.Position water shield from kit, as shown in Illustration 2. Apply foam tape on the perimeter and across partition panel, as shown in Illustration 2.
E.Set top machine carefully and squarely on bottom machine.
F.Remove front, back, and side panel on the evaporator end of both machines.
Manitowoc Ice, Inc.
2110 South 26 Street, P.O. Box 1720, Manitowoc, WI | 8001953 |
Telephone | Page 1 of 5 |
Web Site - www.manitowocice.com | Rev. 05/11/01 |