Manitowoc Ice installation instructions K00022 ADAPTER KIT, Installation Instructions

K00022 ADAPTER KIT

Installation Instructions

1.The K00022 adapter kit is used for installing a B-0450, B-0600, B-0800, or B-1000 ice machine on a C-950 bin. The bin must be leveled before proceeding to step 2.

2.Installation of adapter (see illustration):

A.Remove foam tape from around bin.

B.Remove existing ice deflector and install deflectors from kit using existing screws. The two deflectors should be installed end-to-end to make one continuous deflector.

C.Apply foam tape to adapters and front and rear bin rail, as shown.

D.Locate right-hand and left-hand adapter panels.

E.Using the adapter panels as templates, drill four 5/32” diameter holes for each adapter in bin.

F.Fasten panels in place with the screws provided in kit.

3.Installation of ice machine:

A.Position ice machine on bin.

B.Proceed to ice machine installation instructions for electrical and water hook-up and start-up procedure.

Manitowoc Ice, Inc.

2110 South 26 Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA 8001453

Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 Web Site - www.manitowocice.com

Rev. 04/29/99