DON’T FUEL, REFUEL, OR
CHECK FUEL WHILE
SMOKING, OR NEAR AN
OPEN FLAME OR OTHER
IGNITION SOURCE.
INCORRECT ASSEMBLY.CAUTION: WHEN
ASSEMBLING THE HANDLES,
MAKE SURE FUEL TANK FACES
AWAY FROM OPERATOR. THIS
IS THE REAR OF THE TILLER,
REFER TO ASSEMBLY
INSTRUCTION ON PAGE 7.
CUTTING HAZARD; KEEP
FEET AND HANDS AWAY
FROM ROTATING TINES.
WEAR EAR AND EYE
PROTECTION.
READ OWNER’S MANUAL
BEFORE USING TILLER, OR
PERFORMING ANY REPAIR
OR MAINTENANCE. KEEP
OWNERS MANUAL IN A
SAFE PLACE.
DO NOT CARRY THE TILLER
IN THIS POSITION.
WARNING • DANGER

IF THE TILLER IS USED IMPROPERLY OR SAFETY PRECAUTIONS ARE NOT FOLLOWED,

THE USERS RISK SERIOUS INJURY TO THEMSELVES AND OTHERS.

READ AND UNDERSTAND THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS TILLER.

! !
An important part of the safety system incorporated in this tiller
are the warning and information labels found on various parts of the
tiller. These labels must be replaced in time due to abrasion, etc. It is your
responsibility to replace these labels when they become hard to read. The
location and part numbers (P/N) of these labels are illustrated on Page 27.

III. Safety label information

4
P/N 400620
P/N 400609

IV. Warnings - do’s

Read and understand the owner’s
manual. Pay particular attention to all
sections regarding safety.
1. Always keep a firm grip on both
handles while the tines are moving and/or
the engine is running. BE AWARE!! The
tines may coast after throttle trigger is
released. Make sure tines have come to a
complete stop and engine is off before
letting go of the tiller.
2. Always maintain a firm footing and
good balance. Do not overreach while
operating the tiller. Before you start to use
the tiller, check the work area for obstacles
that might cause you to lose your footing,
balance or control of the machine.
3. Thoroughly inspect the area where
equipment is to be used and remove all
objects, which can be thrown by the
machine.
4. Always keep area clear of children,
pets, and bystanders.
5. Always stay alert. Watch what you
are doing and use common sense. Do not
operate unit when fatigued.
6. Always dress properly. Do not wear
loose clothing or jewellery, they might get
caught in moving parts. Use sturdy gloves.
Gloves reduce the transmission of
vibration to your hands. Prolonged
exposure to vibration can cause numbness
and other ailments.
7. While working, always wear
substantial footwear and long trousers. Do
not operate the equipment when barefoot
or wearing open sandals.
8. Always wear ear and eye protection.
Eye protection must meet applicable CE
requirements. To avoid hearing damage,
we recommend hearing protection be
worn whenever using the equipment.
9. To reduce fire hazard, keep the
engine, and petrol/fuel storage area free of
vegetative material and excessive grease.
10. Start the engine carefully,
according to the manufacturer’s
instructions and with feet well away from
tool(s).
11. Keep all nuts, bolts and screws
tight to be sure the equipment is in safe
working condition.
12. Use extreme caution when
reversing or pulling the machine towards
you.
13. Work only in daylight or good
artificial light.
14. Always be sure of your footing on
slopes.
15. Exercise extreme caution when
changing direction on slopes.
16. Always keep a safe distance
between two or more people when
working together.
17. Always inspect your unit before
each use and ensure that all handles,
guards and fasteners are secure, operating,
and in place.
18. Always maintain and examine your
Tiller with care. Follow maintenance
instructions given in manual.
19. Always store tiller in a sheltered
area (a dry place), not accessible to
children. The tiller as well as fuel should
not be stored in a house.