Marantz PM8004, 541110491028M manual Specifications, Explanation terms, Index

ENGLISH

Specifications

• Power output
(20 Hz – 20 kHz simultaneous drive of both channels):	70 W x 2 (8 Ω load)
• Total harmonic distortion	100 W x 2 (4 Ω load)
(20Hz – 20kHz simultaneous drive of both channels, 8Ω load):	0.02%
• Output band width
(8Ω load, 0.05%):	5Hz – 60kHz
• Frequency response
(CD, 1W, 8Ω load):	5Hz – 100kHz ±3dB
• Dumping factor
(8Ω load, 20Hz – 20kHz):	100
• Input sensitivity/Input impedance
PHONO (MM):	2mV/47kΩ
CD, TUNER, AUX/DVD, RECORDER:	200mV/20kΩ
POWER AMP DIRECT IN	1.6V/15kΩ
• Output voltage/Output impedance
PRE OUT	1.6V/600Ω
• Maximum allowable PHONO input level (1kHz)
MM	100mV
• RIAA deviation (20Hz ~ 20kHz)	±0.5dB
• S/N (IHF-A, 8Ω load)
PHONO (MM)	87dB (5mV input, 1W output)
CD, TUNER, AUX/DVD, RECORDER	106dB (2V input, Rated output)
POWER AMP DIRECT IN .	125dB (Rated output)
• Tone control
Bass (50Hz)	±10dB
Mid (900Hz)	±6dB
Treble (15kHz)	±10dB
• Power requirement	AC 120V 60Hz
• Power consumption
(UL60065)	200W
Standby power consumption	0.3W
• Weight	26.9 lbs (12.2kg)

For the purpose of improvement, the specifi cations and design are subject to change without notice.

Explanation terms

P

Protection Circuit

This is a function to prevent damage to components within the power supply when an abnormality such as an overload or excess voltage occurs for any reason.

In this unit, the STANDBY indicator blinks and the unit enters standby mode when an abnormality occurs.

S

Speaker impedance

This is certain-rated resistance of the speaker set to an alternating current and expressed in ohms. The smaller the impedance, the greater the output. However, load on the amplifier is increased. Use speakers whose impedance is supported by this unit.

Index

vvA

Adjusting the tone················································ 9 Adjusting the volume············································ 9 Auto standby mode············································ 10

vvB

BALANCE························································· 4, 8 BASS································································· 4, 8 Batteries······························································· 3 Before use···························································· 8

vvC

Connection

Connecting cables·············································· 6 Connecting players············································· 7 Connecting recorders········································· 7 Connecting the speakers································ 6, 7

vvI

INPUT SELECTOR············································ 4, 8

vvM

MID··································································· 4, 8 Mute································································· 4, 8

vvP

POWER AMP DIRECT······································ 4, 9 Power cord··························································· 8 PRE OUT························································· 4, 10 Protection circuit············································· 6, 12

vvR

Remote control··········································· 3, 5, 10

vvS

SOURCE DIRECT·············································· 4, 8 Speaker cables·················································· 6, 7 Stereo pin-plug cable············································ 6

vvT

TREBLE····························································· 4, 8

vvV

VOLUME··························································· 4, 8

12