•You can program up to 99 tracks to play in any desired
sequence.
•Tracks can be programmed more than once, but each time
counts as a track. (SSTTEEPP)
•A program for playback can be made from both the disc in
the recorder deck and the disc in the player deck. A program
for recording can only be made from the disc in the player
deck.
Programming for playback
11Select Changer mode or DJ mode using the DJ MODE key.
➜CHANGER or DJ MODE appears on the display.
22Press CDR or CD to select the required deck.
➜Selected key lights up.
33Press PROG(ram) to enter Program mode.
➜PPRROOGGflashes and PROGRAM followed by track
information appears on the display.
44Select the required track numbers by turning the EASY
JOG/ENTER key left or right and store by pressing ENTER.
or:
Key in a track number with the number keys on the remote
control and press ENTER to confirm. For 2-digit numbers,
press the keys in rapid succession.
➜The track will be stored in the program.
➜The track number, total program time and the number of
programmed tracks (SSTTEEPP) are displayed.
55Repeat step 44for all tracks to be programmed.
66Press STOP or PROG(ram) to end programming.
➜PPRROOGGlights continuously.
77Press PLAY/PAUSE 2; to start programmed play.
Programming for recording
11Press REC TYPE to select the required recording mode (see
‘Recording’).
22Compile your programme as described in “programming for
playback”. (steps 3to 5)
•Only tracks from the disc in the CD player can be stored.
33Press REC(ord). to start recording.
Note:
- To review the program, press PROG(ram), followed by
5
or
6
with the CD player or CD recorder in stop mode.
- To add more tracks to the program, repeat steps 11to 77.
- If you try to store more than 99 tracks,
PROG FULL
appears on the display.
Clearing a program
11Press STOP 9if necessary to stop programmed play.
22Press STOP 9again to clear the program.
➜PPRROOGGdisappears from the display.
•The program is also cleared if you open the disc tray.
Erasing a track from a program
11In Stop mode press PROG(ram) to enter Program mode.
22Use 5or 6to select the track that has to be deleted.
➜The track number and program step will be shown on
the display.
33Press CANCEL/DELETE to erase the track from the program.
➜The remaining program steps and the remaining playing
time of the program will be displayed.
4Repeat step 2and 3for all tracks to be erased.
5Press STOP 9or PROG(ram) to end erasing.
➜PPRROOGGlights continuosly.
REM TRACK
REC TIME
DIGITAL
OPTICAL
ANALOG
PROG
SHUFFLE
REPEAT
SCAN
I
I
CD
RW
CHANGER
SYNC MANUAL RECORD
REMTOTAL
ALL
TRACK
TIME STEPTRACK
CD
RW
278
11
REM TRACK
REC TIME
DIGITAL
OPTICAL
ANALOG
PROG
SHUFFLE
REPEAT
SCAN
I
I
CD
RW
CHANGER
SYNC MANUAL RECORD
REMTOTAL
ALL
TRACK
TIME STEPTRACK
CD
RW
1
REM TRACK
REC TIME
DIGITAL
OPTICAL
ANALOG
PROG
SHUFFLE
REPEAT
SCAN
I
I
CD
RW
CHANGER
SYNC MANUAL RECORD
REMTOTAL
ALL
TRACK
TIME STEPTRACK
CD
RW
123456789
10 11
Remarks about programming
PROGRAMMING
English
26