FUNCTIONAL OVERVIEW

 

 

 

 

Panel display

 

 

 

 

 

Lights up when the

Lights up when the

 

Lights up when the

 

A-B repeat function is on.

repeat function is on.

progressive scan

 

Lights up when the ALL

 

 

 

system is activated.

 

 

 

 

 

 

repeat function is on.

 

GROUP

 

P.SCAN

Displays a type of the disc

 

 

 

 

 

 

 

DVD

which is inserted on the tray.

 

 

 

 

 

• DVD: DVD

Lights up when the

 

 

 

VCD

• CD: Audio CD, MP3, JPEG, WMA

inserted disc comes

 

 

 

 

• VCD: Video CD

to a pause.

 

 

Displays the elapsed time of the title

Lights up when playing back

 

 

 

 

or track. The number of a new title,

in slow mode. (DVD, VCD)

Lights up when the inserted

chapter, or track is displayed when

 

disc is being played back.

a chapter or track is switched.

English

Displays During Operation

Power on

No disc inserted or cannot read

Tray open

Tray closed

Loading the Disc

Lights up when the playback control is activated (VCD)

Power off

Using the remote control

Keep in mind the following when using the remote control:

Make sure that there is no obstacle between the remote and the remote sensor on the unit.

Use within the operating range and angle, as shown.

60

Loading the Batteries

1. Open the battery compartment cover.

2. Insert two “AA” (R6P) batteries, with each one oriented correctly.

3. Close the cover.

Cautions On Batteries

Use “AA” (R6P) batteries in this remote control unit.

Replace the batteries with new ones approximately once a year, though this depends on the frequency with which the remote control unit is used.

If the remote control unit does not operate from close to the main unit, replace the batteries with new ones, even if less then a year has passed.

The included batteries are only for verifying opera- tion. Replace them with new batteries as soon as possible.

When inserting the batteries, be careful to do so in

the proper direction, following the and marks in the remote control unit’s battery compartment.

To prevent damage or battery fluid leakage:

Do not use a new battery with an old one.

Do not use two different types of batteries such as alkaline and manganese.

Do not short-circuit, disassemble, heat or dispose of batteries in flames.

Remove the batteries when not planning to use the remote control unit for a long period of time.

If the batteries should leak, carefully wipe off the fluid from the inside of the battery compartment, then insert new batteries.

– 11 –

EN

Page 11
Image 11
Marantz DV4500 manual Panel display, Displays During Operation, Using the remote control, Loading the Batteries