Marantz DV6600 manual MP3 Jpeg, Dvd-V Dvd-A, Playing a Disc

PLAYING A DISC

Basic Playback

NOTES:

• Video and audio signals may be distorted temporarily

when switching to/from the HDMI output mode.

DVD-V

DVD-A

DVD-RW

VCD

Super

Audio CD

• Use a display equipment with an HDMI terminal.

• Progressive video signal will not be output from the

CD

MP3

JPEG

WMA

DivX®

COMPONENT VIDE OUT during the HDMI output mode.

Getting started

• You cannot set a resolution which is not compatible on

• Turn on the power of the TV, amplifier

the connected display equipment.

and any other components which are

• You can check the HDMI connection status by pressing

connected to the DVD player.

the DISPLAY button during playback with the HDMI

• Make sure the TV and audio receiver

output mode. (Refer to pages 24-25.)

(commercially available) are set to the

• The HDMI button is inoperative when no HDMI connec-

correct channel.

tion is made or the connected HDMI equipment is

Press the POWER button.

turned off.

1

• “P-ON” will appear briefly on the display panel.

AUDIO EX Mode

2

Press the OPEN/CLOSE button to open disc loading tray.

You can enjoy higher quality audio by stopping the analog

Place the disc in the tray, with the label facing up.

3

Press the PLAY button.

video signals and display.

4

1

Press the AUDIO EX. button on the front panel to

• The tray will close automatically, and playback will start

from the first chapter or track of the disc. If the playback

output audio and HDMI signals only (no analog

does not start automatically, press the PLAY button.

video signals will be output, and the display will be

• When you play back the DVD with a title menu, it may

turned off).

appear on the screen. In this case, refer to “Title Menu”.

• You can press the AUDIO EX. button either during

5

Press the STOP button to stop playback.

playback or in stop mode.

NOTES:

• The AUDIO EX. indicator will light up.

• A “prohibited icon” may appear at the top-

• The higher quality sound will be achieved.

right on the TV screen during operation,

NOTES:

warning that a prohibited operation has

• In setup menu, the AUDIO EX. button is not available.

been done to the DVD player or the disc.

• The AUDIO EX mode will be released when you press

• With DVDs that use some titles for play-

the buttons listed below.

back program signals, playback may

OPEN/CLOSE button (on both the remote control and

start from the second title, or it may skip these titles.

the front panel), SETUP, POWER or DISPLAY button

• During the playback of two layered disc, pictures may

(on the remote control), POWER ON/STANDBY or

stop for a moment. This happens when the 1st layer

AUDIO EX. button (on the front panel).

switches to the 2nd layer. This is not a malfunction.

General Features

• The operation may vary when you playback DVDs with

disc menu or Video CDs with PBC. Refer to the manual

accompanying the disc for details.

DVD-V

DVD-A

• A DVD-RW disc recorded in the VR mode may freeze

DVD may contain menus to navigate the disc and access spe-

momentarily during playback depending on how the playlist

cial features. Press the appropriate Numeric buttons or use the

was made and edited (deleted titles, repeated recording).

Cursor buttons (L/ K / B/ s) to highlight your selection in the

DVD main menu and press the ENTER button to confirm.

CANCELLING AND CALLING BACKTHE PBC FUNCTION

NOTE:

English

VCD

1Insert a Video CD.

2Press the STOP button.

3Press the Numeric buttons to enter the desired track number.

•The PBC function is now cancelled and the playback of the Video CD will start.

4To call back the PBC function, press the STOP but- ton twice, and then press the PLAY button.

•Title menu will appear on the display.

HDMI Setup

1	Press the HDMI button on the front panel to select
	the HDMI output mode.
	The output mode changes as follows every time
	the HDMI button is pressed.
	480P/576P	720P	1080i	hdOFF
	• Press the HDMI button once to display the current
	HDMI output mode.
	• Press the HDMI button appropriate times to display the
	desired mode.
	• Leave the display showing the desired resolution for 3
	seconds, and the current HDMI output mode will be

changed to the selected one. 480P/576P (Default)

:Video output from the HDMI OUT terminal at 480p or 576p. 720P : Video output from the HDMI OUT terminal at 720p.

1080i : Video output from the HDMI OUT terminal at 1080i.

hdOFF: No video output from the HDMI OUT terminal.

•Unless stated, all operations described are based on remote control use. Some operations can be carried out using the menu bar on the TV screen.

Disc Menus

DVD-V

1Press the MENU button.

•The DVD main menu will appear.

2 If the feature is not available,	symbol may
appear on the TV screen.

3If disc menu is available on the disc, audio lan- guage, subtitle options, chapters for the title and other options will appear for selection.

4Press the Cursor buttons (L/ K/ B/ s) to select an item, and the ENTER button to confirm selection.

Title Menu

DVD-VDVD-A

1Press the TOP MENU button.

•The title menu will appear.

2 If the feature is not available,	symbol may
appear on the TV screen.

3Press the Cursor buttons (L/ K/ B/ s) to select an item, and the ENTER button to confirm selec- tion.

•Playback will begin at the selected title.

VCD

1When playing a Video CD with PBC func- tion, the title menu will appear automatically.

– 17 – EN