2 Connecting Up
Easy setup
This easy setup is the minimum set of connections you need to start watching
Important
•Before making or changing any rear panel connections, make sure that all components are switched off and unplugged from the wall outlet.
•While a connected component is turned on, do not unplug the power cord of this DVD player from the wall outlet. The speaker may be damaged.
Connect to a composite video | |
FLASHER IN | 1 input on your TV using the |
Control terminal for use by | supplied Audio/Video cable. |
custom installers. |
|
2 Connect to a pair of stereo audio inputs on your TV using the supplied Audio/Video cable. You can connect a subwoofer to the SUBWOOFER Jack.
See Note:
Remote Switch
OUT | IN |
|
|
|
|
|
|
|
| AC IN |
| HDMI |
|
|
|
|
|
|
|
|
|
| Ver 1.1 |
|
|
|
| AUDIO OUT |
|
|
|
|
|
|
|
|
|
|
| FRONT |
| MIXED |
|
|
|
|
|
|
|
|
|
| 2CH |
|
| SURR.R | SURR.L | SUB WOOFER | CENTER | R |
| L | R | L | |
|
|
|
|
|
|
| VIDEO |
|
|
|
|
|
|
| COMPONENT | S1 | 1 |
|
|
| |
FLASHER IN | COAX. |
| Y | CB/PB CR/PR |
|
|
|
|
| |
|
|
|
|
|
|
|
| |||
| INT. |
|
|
|
|
| 2 |
|
|
|
|
|
|
|
|
|
|
|
|
| |
| EXT. | OPT. |
|
|
|
|
|
|
|
|
REMOTE | DIGITAL |
|
| VIDEO OUT |
|
| A/V EUROCONNECTOR |
| ||
OUT |
|
|
|
|
|
|
|
| ||
CONTROL |
|
|
|
|
|
|
|
|
| |
INT. | 3 | Plug into a standard |
|
| AC wall outlet. |
EXT.
Connecting audio/video cables
Be sure to insert each plug fully for the best connection. The plugs and jacks are
Connecting system control cables
By connecting this DVD player to another Marantz audio component using a supplied system control cable, you can remotely operate the components as a single system.
•When connecting to a component with a remote sensor, be sure to connect the REMOTE CONTROL IN jack of this DVD player to
the REMOTE CONTROL OUT jack of the component with the remote sensor.
•When connecting to component which is not equipped with a remote sensor, be sure to connect the component to the REMOTE CONTROL OUT jack of this DVD player.
Note
•When connecting to a standard TV, select
4:3 LETTER BOX or 4:3 PAN SCAN in the TV Aspect setting (see page 45).
•Connect the video output of the player directly to your TV. Because the player is designed
to support an Analog Protection System copy protection there are cases when proper playback will not be possible if the player is connected to the TV through a VCR and images are recorded and played on the VCR.
•The player’s video output and S1 output are not be progressive.
•Remote switch
When using this DVD player independently, set this switch to INT. (INTERNAL). When using this DVD player in a system with a Marantz receiver equipped with a remote sensor, set the switch to EXT. (EXTERNAL). Change the switch setting using a pen with a sharp tip etc.
•Flasher Input
This is used when controlling components from different rooms with a keypad or other input device. Set the remote switch to EXT. (EXTERNAL) when using a flasher input.
10
