Marantz MS308 Components in your System, MS302 Front Left and Right and, Subwoofer, MS304, Phase

Components in your System

MS302

Front Left and Right and

Rear Left and Right

Loudspeakers

Subwoofer Controls

1. Phase

Selects subwoofer output to be either in or out of phase (180 degrees). This allows you to optimise the phase of your MS308 to different listening positions and that of other speaker systems used at the same time.

2. Volume

1

7

5

l O

6

MS304

Centre

Channel

Loudspeaker

32

+	+	4	MS308
-	-

Subwoofer

This control allows you to adjust the volume of low frequency output from your subwoofer amplifier to obtain the best sound-balance within your surroundings

3. Low Frequency Cut-Off

This is used to adjust the point at which the crossover will separate the low frequencies being used by the subwoofer from the higher frequencies played by the rest of the system. Raising the Low Frequency Cut-Off will increase the frequency range that the MS308 will reproduce. Lowering the Low Frequency Cut-Off will limit the range of frequencies reproduced.

4. High Level Input / High Level Output

If your amplification system does not have a dedicated subwoofer line output, your subwoofer must be connected via the high level terminals on the rear panel. Connection should be made from the speaker terminals on your amplification system to the High Level Input Connections

4