Marantz PD6150D manual Rear View/ Terminal Board

Rear View/ Terminal Board

C

D

E

F

G
H	HDMI
I	A B

A AC IN			F DVD2/ HD2, RGB2
Connect the included power cord here.			DVD2/ HD2:	You can connect DVDs, High Definition
B EXT SPEAKER L and R				sources, Laser Discs, etc. here.
				This input can be set for use with an
Connect speakers (optional) here. Maintain the correct
				RGB or component source.
polarity. Connect the	(positive) speaker wire to the
				(see page 25)
EXT SPEAKER terminal and the		(negative)
			RGB2:	You can connect an analog RGB signal
speaker wire to the	EXT SPEAKER terminal on
				and the syncronization signal.
both LEFT and RIGHT channels.
Please refer to your speaker’s User Guide.			G RGB1 (D-Sub)

Connect an analog RGB signal from a computer, etc.

C VIDEO1, 2, 3 (BNC, RCA, S-Video)	here.
Connect VCR’s, DVD’s or Video Cameras, etc. here.
D AUDIO1, AUDIO2, AUDIO3	H DVD3/HD3, RGB3 (HDMI)
	Connect a digital signal (TMDS) from a source with a
These are audio input terminals.
	HDMI output.
The input is selectable. Set which video image to allot
	This input can be set for use with an RGB3 or DVD3/
them from the audio menu screen.
	HD3 source. (see page 26)
E DVD1 / HD1	I EXTERNAL CONTROL (D-Sub)

Connect DVD’s, High Definition or Laser Discs, etc.	This terminal is used when operating and controlling
here.
	the monitor externally (by external control).

13