Before Making Connections, Wiring Speaker Cable

BEFORE MAKING CONNECTIONS

WIRING SPEAKER CABLE

Here following are explained two types of connections that

improve sound quality. The speakers in these explanations

•

Be careful not to short circuit in wiring speaker cables.

have low and mid/high input jacks that support a bi-amp con-

nection. To determine whether or not your speakers support a

•

Peel off the corting of speaker cable as shown below.

bi-amp connection, check in the instruction manual that came

Approx. 1 cm

with your speakers or contact the manufacturer.

ENGLISH

Cut the corting	Peel off the	Twist
of cable.	edge of cable.	conductors.
of cable.

•Wiring with speaker cable.

BI-WIRING CONNECTION

Abi-wiring connection separately connects the low and mid/ high jacks of the speaker to the amplifier using separate speaker cables. Because separate cables are used for low and mid/high sounds, the return current generated in the low speaker causes little interference with the mid/high speaker. The PM-15S1 and speakers of Connection Example 1 (pg. 5) use a bi-wiring connection, therefore also refer to that page for help.

Turn counter-clockwise	Insert conductor	Turn clockwise
to loosen.	of cable.	to tighten.

•Wiring with “Y” style terminal

CD player, etc.

PM-15S1

Bi-wiring	Speaker system
connection
	Mid/high
	speaker
	Band
	pass filter
	Low
	speaker

Turn counter-clockwise	Insert conductor.	Turn clockwise
to loosen.		to tighten.

Your speaker system must satisfy the below conditions. If it does not, the PM-15S1’s protective circuit will trip, whereby preventing proper playback. In some cases, the amplifier and speakers may be damaged.

•If using 1 set of speakers, total speaker impedance must be 4Ω or more.

•If using 2 sets of speakers, total speaker impedance must be 8Ω or more.

COMPLETE BI-AMP CONNECTION

Proposed by Marantz, the complete bi-amp connection en- hances the bi-wiring connection. With it, the low and mid/high amplifiers are separate and independent of the preamplifier, therefore interference between low and mid/high sounds is reduced to a minimum. As a result, a wide sound environment can be reproduced. Connection Example 3 (pg. 7) connects two PM-15S1s by FCBS in a complete bi-amp connection, therefore also refer to that page for help.

	Complete bi-amp connection	Speaker system
		Mid/high
CD		speaker
CD	PM-15S1 bi-	Band
player,	PM-15S1 bi-	Band
player,	amp mode	pass filter
etc.	amp mode	pass filter
etc.		Low
		Low
		speaker

PM-15S1 specifications

The Marantz PM-15S1 is a high-performance integrated amplifier that stands as a testament to Marantz’s commitment to audio excellence. Known for its sophisticated design and robust capabilities, this model has garnered acclaim among audiophiles and casual listeners alike.

One of the standout features of the PM-15S1 is its high current capability, which ensures that it can drive a wide range of speakers with ease. This amplifier is designed with a unique power supply that incorporates a massive toroidal transformer and high-quality filtering capacitors. This configuration provides steady and clean power, allowing for dynamic sound reproduction without distortion, making the PM-15S1 suitable for various musical genres.

The heart of the PM-15S1 lies in its advanced amplification technology. It employs a fully discrete current feedback circuit that has been meticulously crafted to deliver a natural and transparent sound. This circuit configuration minimizes signal degradation, allowing for precise audio playback that is faithful to the original recording. Additionally, the amplifier features a high-speed, high-current output stage that enhances its performance, particularly in reproducing intricate musical passages.

One significant characteristic of the PM-15S1 is its versatility. Equipped with multiple input options, including balanced XLR and unbalanced RCA connectors, users can easily integrate various audio sources. The amplifier also features a built-in phono stage, accommodating both moving magnet and moving coil cartridges, which is a boon for vinyl enthusiasts.

The construction of the PM-15S1 reflects Marantz’s dedication to quality. The amplifier is housed in a meticulously crafted chassis that reduces vibration and interference, ensuring that the audio signal remains pure. Its elegant design, complemented by luxurious finishes, makes it an attractive addition to any audio setup.

Another essential aspect of the PM-15S1 is its user-friendly interface. The front panel includes intuitive controls for volume, balance, and source selection, allowing for a straightforward user experience.

In conclusion, the Marantz PM-15S1 integrated amplifier is a remarkable piece of audio engineering that combines cutting-edge technologies with superior sound quality. Its robust features and sophisticated design make it a perfect choice for those who seek an enriching listening experience, whether it be for casual listening or critical sound reproduction.

Marantz PM-15S1 manual Before Making Connections, Wiring Speaker Cable, BI-WIRING Connection

Models: PM-15S1