26
Appendix
TipsSettingsConnections
Contents
Front panel Rear panel IndexRemote
Playback
Turning o the sound temporarily
1Press MUTE .
The mute indicator lights.
%
•Muting can be cancelled by pressing MUTE again.
Adjusting the tone
1Turn the BASS, MID, TREBLE and BALANCE control
knobs to adjust the tone.
NOTE
•When the source direct mode is on, the tone cannot be adjusted because the audio
signal does not pass through the tone adjustment circuit (BASS, MID, TREBLE,
BALANCE). Check that the source direct indicator is o.
Selecting the speakers for audio output
1Press SPEAKERS A/B to select the speaker system to be
used for playback.
The indicator of the selected speakers lights.
%
•Press SPEAKERS A/B to turn the speaker audio output o, and the speaker
switching indicator turns o.
Selecting the input source
1Press the input source select button to be played back.
The indicator of the selected input source lights.
%
•You can also select the input source by turning INPUT SELECTOR on the main unit.
Adjusting the volume
1Use VOLUME df to adjust the volume.
%
•You can also adjust the volume by turning VOLUME on the main unit.