FEATURE MENU CONTROLS (CONTINUED)
MAIN MENU
PICTURE
FEATURES
SOUND
EXIT
EXIT
1 OF 5
ANALOG
FORMAT
MORE...
CLOSED
CAPTIONS
FEATURE MENU
CHANNEL
MEMORY
CABLE
TUNING
CABLE TUNING
EXIT
CABLE ANT A
CABLE ANT B
NORMAL ANT A
NORMAL ANT B
1ST TIME SETUP
DN
+
+
mute
volume
channel
ok
Exit
Menu
HDR PTV
INFO A/CH3/5
Source
1
3
1
2
You need to make sure the TV is
set to pick up either Cable TV
or Antenna signals. In other words,
the TV needs to know if you
connected a Cable TV signal or a
normal antenna to its ANTENNA
plug.
NOTE: If you went through First
Time Setup (in your Quick Use
Guide), this task has already been
completed for you.
Select CABLE CHANNEL
TUNING control.
With the FEATURES MENU (1 of
5) on screen, move the RED
highlight with the MENU
buttons. Then press the MENU (or
ok) button to select the feature.
Press the MENU ▲▼ buttons
to move the RED highlight. Press
the center MENU button to select
(U) the desired mode - For
Example: CABLE.
CABLE- If you DO have
Cable TV connected
to the TV. Channels
1-125 available.
NORMAL- If you have an
Antenna connected
to the TV. Channels
2-69 available.
Press the Exit button to clear
the screen.
CABLE TUNING
1
2
3
12
Note: Both ANT(enna) A and ANT B inputs
on the rear of the TV can be set for the correct
connected signal (either an Antenna or Cable
TV source).