OPERATIONS
HOW TO ADJUST CURRENT TIME
You can adjust the current time even if the system power is off.
Time adjustment (for example: 11:35)
1.Press the TIME ADJUST button. (Clock section will be shown on the display.)
2.Set hour (11) by pressing the TUNING (▼/▲) buttons.
3.Press the NEXT button. (Minutes signal blinks on the display.)
4.Set minute (35) by pressing the TUNING (▼/▲) buttons.
5.Pressing the TIME ADJUST button or NEXT button completes the adjustment.
HOW TO PRESET BROADCASTS
<Preparation>
Press the BAND button to select the broadcast band.
Manual Memory Presetting
1.TUNING
Select the broadcast frequency you want to memorize by pressing the TUNING UP/DOWN button.
2.PRESET CALL
Press the MEMO button briefly (for 0.5 second or less).
Select the channel you want by pressing the PRESET UP/DOWN button while the “MEMORY” indicator lamp is blinking.
3.MEMORY
Press the MEMO button to memorize the broadcast.
• You can preset up to 30 FM and 30 AM (MW) channels.
Automatic Memory Presetting
1.MEMORY
Press the MEMO button for long (for more than 0.5 second).
Whenever the next highest broadcast frequency is selected, the selected broadcast is preset automatically.
2.PRESET CALL
Check the preset broadcast by pressing the PRESET UP/DOWN but- ton.
NOTES:
•In FM Automatic Memory Presetting, frequency is automatically memorized. The setting which has better reception will be preset first.
•If the new broadcast channel is preset to a channel, the channel which had been preset to that position earlier will be automatically erased.
•It is impossible to preset automatically in areas far away from the broad- cast station or in mountain areas where received signals are weak.
HOW TO MEMORIZE BROADCASTING STATION | ENGLISH | |||||
| ||||||
NAME |
| |||||
If only a frequency is preset, fill in the station name using manual or |
| |||||
automatic memory presetting. |
| |||||
(Example) FM 98.80 MHz 3ch, Station name: BBC 1 |
| |||||
FRANçaIS | ||||||
1. Press the BAND button. | ||||||
| ||||||
|
| Select the FM band. |
| |||
2. | TUNING |
| ||||
|
| Set 98.80 MHz by pressing the TUNING button. |
| |||
|
|
| ||||
3. | ST. NAME |
| ||||
DEUTSCH | ||||||
|
| Press the ST. NAME button. | ||||
|
| |||||
|
| Preset the station name, “BBC 1”. | ||||
|
| (1) B fi B | ||||
|
| when the first signal blinks, press the NEXT button. |
| |||
|
| (2) Preset “B, B, C, 1” as in step (1) above. |
| |||
|
|
| ||||
|
|
|
|
|
| |
4. | MEMORY | NEDERLANDS | ||||
|
| Press the MEMO button briefly (0.5 second or less). | ||||
|
| (The “MEMORY” indicator blinks.) | ||||
5. | PRESET CALL | |||||
|
| After setting “03” by pressing the PRESET UP/DOWN button, press | ||||
|
|
| ||||
|
| the MEMO button briefly once more. |
| |||
• BBC1 FM 98.80 MHz 03 has been just preset. |
| |||||
ESPAÑOL | ||||||
NOTES: | ||||||
• File content: A, B, C … X, Y, Z (alphabet) | ||||||
|
| 0, 1, … 8, 9 (number), blank | ||||
• Current time will not be displayed if the station name has already |
| |||||
|
| been preset. |
| |||
|
|
| ||||
|
|
|
|
| ||
HOW TO USE SLEEP FUNCTION | ITALIANO | |||||
Sleep programming is used to preset the time to turn off system power | ||||||
while listening to music. | ||||||
|
|
|
|
| ||
1. Press the SLEEP button. |
| |||||
|
| “SLEEP 120” is shown on the front display. |
| |||
|
|
|
|
| ||
2. Each press of the button changes the time indication by 10 min- | PORTUGUÊS | |||||
|
| utes. | ||||
|
| (Released condition) | ||||
| fi SLEEP 120 fi SLEEP 110 fi … fi SLEEP 010 fi SLEEP … |
|
| |||
|
|
| ||||
If you press the TUNING UP/DOWN button after pressing the SLEEP | ||||||
| ||||||
| ||||||
| ||||||
button, you can adjust the time by one minute at a time. | SVENSKA | |||||
3. Five seconds after presetting the sleep time, the system will return | ||||||
|
| to the previous status and thereafter begin sleep timing. | ||||
|
| To cancel the SLEEP (timer), turn the power off. | ||||
|
|
|
|
| ||
NOTES: |
| |||||
| ||||||
• If you want to know the time remaining until the sleep time, press |
| |||||
|
| the SLEEP button once. |
| |||
• To allow the sleep function to work properly, you need to connect | DANSK | |||||
|
| the remote control terminal of the tuner to the corresponding re- | ||||
|
| mote control terminal of the amplifier. | ||||
|
|
|
|
|
5