Marantz VC5400 manual Speaker Settings

Speaker Settings

Make the following settings for the built-in 5.1 channel surround decoder.

Disc Audio

Disc Subtitle

Disc Menu	R	R
	Front L
Rating
Country Code	Volume	0 dB
	Size	Large
TV Aspect
Menu Language	Distance	1 ft
Progressive Scan	Test
Digital Audio Output	Return
5.1 Speaker Setup
Others

Select “5.1 Speaker Setup” using the 3/4 but-

1 tons on the setup menu.

2 While “5.1 Speaker Setup” is selected, press 2 button.

3 er.Press 1 / 2 buttons to select the desired speak-

4Adjust options by using 1/2/3/4 buttons.

Speaker selection

Select a speaker that you want to adjust. (Front speak- ers (Left), Front speakers (Right), Center Speaker, Rear speakers (Left), Rear speakers (Right), or Subwoofer)

Volume

Press 1 / 2 to adjust the output level of the selected speaker. (-10dB - 0dB)

Size

Press 1 / 2 to set a mode. (Large, Small or None)

If you have connected the system to a speaker with a low frequency of 100Hz or below, select “Large.”

If you have connected the system to a speaker with- out a low frequency of 100Hz or below, select “Small.” If you have not connected a subwoofer, always select “Large” for Front speaker (L/R).

When you do not have a certain speaker connected, select “None.”

Front L/R speaker’s size can be set to “Large” or “Small.”

If Front L/R speaker’s size is set to “Small,” Rear and Center speaker’s size can be set to “Small” or “None.”

Subwoofer’s size can be set only to “Large” or

“None”.

Distance

If you connected speakers to your DVD Player, setting the Distance lets the speakers know how far the sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the listen- er at the same time. (1 ft = 30.48 cm)

Test

Press SELECT/ENTER to test the signals of each speaker. Adjust the volume to match the volume of test signals memorized in the system.

Front Left (L) → Center → Front Right (R)

→Rear Right (R) → Rear Left (L)

Return

Press SELECT/ENTER to return to the previous menu.

30