Mark Levinson
Unpacking
Perform the following steps to unpack the new Nº512 CD/SACD player.
1.Position the box so that the top side is facing up.
2.Use a utility knife to slice open the box and lift the box sides apart to reveal the inner box.
3.Carefully slice open the inner box and lift the box sides apart.
4.Remove the white accessory box and put it aside.
5.Carefully lift the Nº512 out of the box.
6.Remove the foam inserts from the sides of the player.
7.Remove the antistatic bag from the Nº512.
Replacing the Remote Control
6
Batteries
The Nº512 CD/SACD player remote control has two installed AA batteries. These should be replaced as required. We recommend using alkaline batteries, which are
To replace the remote control batteries:
1.Locate the battery compartment cover on the bottom of the remote control.
2.Using a
3.Remove the battery compartment cover.
4.Remove the old batteries.
5.Observing the proper polarity, insert the new batteries.
6.Position the cover over the battery compartment and replace the screws removed in Step 2.
7.Always properly dispose of the old batteries.