RK Series
Infrared Heaters
FILE #E21609
Installation & Maintenance Instructions
Dear Owner,
Congratulations! Thank you for purchasing this new heater manufactured by a division of Marley Engineered Products. You have made a wise investment selecting the highest quality product in the heat- ing industry. Please carefully read the installation and maintenance instructions shown in this manual. You should enjoy years of efficient heating comfort with this product from Marley Engineered Products...
the industry’s leader in design, manufacturing, quality and service.
... The Employees of
Marley Engineered Products
| ! | WARNING | ||
|
|
|
| |
Read Carefully - This instruction sheet contains vital |
| locations as described by the National Fire Protection | ||
information for the proper installation, use and efficient |
| Association (NFPA). This heater has hot and arcing | ||
operation of the heater. Carefully read the manual before |
| or sparking parts inside. DO NOT use in areas where | ||
installation, operation, or cleaning of the heater. Failure to |
| gasoline, paint, or other flammable liquids or stored. | ||
adhere to the instructions could result in fire, electric | 5. This heater is intended for ceiling installation ONLY. | |||
shock, death, serious personal injury, or property dam- |
| The following clearances MUST be maintained: | ||
age. Save these instructions and review frequently for |
| a) Top of heater to ceiling - 3 in (76 mm). | ||
continuing safe operation and instructing future users. |
| b) Bottom of heater to floor - 7 ft (2.1m). | ||
RISK OF FIRE, ELECTRICAL SHOCK OR FALLING: | c) Side of heater to wall - 12 in (305 mm). | |||
1. | To prevent electrical shock, disconnect all power |
| d) End of heater to wall - 12 in (305 mm). | |
| e) Side of heater to side of adjacent heater - 36 in | |||
| coming to heater at main service panel before wiring |
| ||
|
| (914 mm). | ||
| or servicing. |
| ||
|
| f) End of heater to end of adjacent heater - 36 in (914 | ||
2. | All wiring must be in accordance with the National |
| ||
| mm). | |||
| and Local Electrical Codes and the heater must be |
| ||
| 6. | Heater MUST be securely fastened to the building | ||
| grounded as a precaution against possible electric | |||
|
| structure to prevent it from falling. | ||
| shock. |
| ||
| 7. | DO NOT stack or store combustible materials in the | ||
3. | Verify the power supply voltage coming to heater | |||
|
| |||
matches the ratings printed on the heater nameplate |
| radiation path under the heater. At least 5 feet (150 |
| mm) clearance MUST be maintained between bot- | |
before energizing. |
| |
| tom of heater and combustibles stored. | |
4. This heater is NOT suitable for use in hazardous |
| |
|
| |
SAVE THESE INSTRUCTIONS | ||
|
|
|
|
|
|
| 1 |
|
