![L Series](/images/new-backgrounds/43928/439281x1.webp)
L Series
Hand Carry Portable Radiant Heaters
Installation & Maintenance Instructions
Dear Owner,
Congratulations! Thank you for purchasing this new heater by Marley Engineered Products. You have made a wise investment select- ing the highest quality product in the heating industry. Please carefully read the installation and maintenance instructions shown in this manual. You should enjoy years of efficient heating comfort with this product from Marley Engineered Products... the industry’s leader in design, manufacturing, quality and service.
... The Employees of Marley Engineered Products
! WARNING
Read Carefully - This Instruction Sheet Contains Vital | 6. Heater element operates at very hot temperatures. Do NOT | |
Information For The Proper Assembly, | place heater near combustibles and DO NOT place | |
combustibles in the radiation path in front of the heater. | ||
Efficient Operation Of The Heater. Carefully Read The Manual | ||
Keep all combustibles at least five (5) feet from front of | ||
Before Assembly, Operation, Or Cleaning Of The Heater. Failure | ||
heater. | ||
To Adhere To The Instructions Could Result In Fire, Electrical | ||
7. Heater is designed and intended for use as illustrated in this | ||
Shock, Property Damage, Serious Personal Injury, Or Death. | ||
instruction sheet only. Do not position or use heater in any | ||
Save These Instructions And Review Frequently For Continuing | ||
other manner. | ||
Safe Operation And Instructing Future Users. | ||
8. This heater is hot when in use. To avoid burns, do NOT let | ||
1. To prevent a possible electrical shock, disconnect all power | ||
bare skin touch hot surfaces. Keep combustible materials, | ||
coming to heater at main service panel before wiring or | ||
such as furniture and papers at least 5 feet from the front of | ||
servicing. | ||
the heater. | ||
2. All wiring must be in accordance with the National and Local | ||
9. DO NOT LEAVE HEATER UNATTENDED WHILE IN | ||
Electrical Codes and the heater must be grounded as a | ||
OPERATION. | ||
precaution against possible electrical shock. | ||
10. Always disconnect heater when not in use. | ||
3. Verify the power supply voltage coming to the heater | ||
11. Do NOT use outdoors in areas subject to wind. | ||
matches the ratings printed on the heater nameplate before | ||
12. Connect to properly grounded outlets or building ground. | ||
energizing. | ||
4. This heater is NOT suitable for use in hazardous locations as | 13. This heater has hot surfaces. Do NOT use it in areas where | |
described by the National Fire Protection Association (NFPA). | gasoline, paint or flammable liquids are used or stored. | |
This heater has hot and arcing or sparking parts inside. Do | 14. Use this heater only as described in this manual. Any other | |
NOT use in areas where gasoline, paint or other flammable | use not recommended by the manufacturer may cause fire, | |
liquids are used or stored. | electric shock or injury to persons. | |
5. This heater is intended to provide temporary, supplemental | 15. In order to prevent equipment damage, protect with a | |
localized heat only in | ground fault device such as Marley Engineered Products | |
intended for use on the floor only. Do NOT place heater on | WMGF240 for 240V heaters and WMGF480 for 480V | |
surface where is could fall or tip over. | heaters. | |
|
|