USER MANUAL LM15 LAMP MODULE

SAFETY WARNINGS

•To prevent short circuits, this product should only be used inside and only in dry spaces.

Do not expose the components to rain or moisture. Do not use the product close to a bath, swimming pool etc.

•Do not expose the components of your systems to extremely high temperatures or bright light sources.

•Do not open the product: the device contains live parts. The product should only be repaired or serviced by a qualified repairman.

•In case of improper usage or if you have opened, altered and repaired the product yourself, all guarantees expire. Marmitek does not accept responsibility in the case of improper usage of the product or when the product is used for purposes other than specified. Marmitek does not accept responsibility for additional damage other than covered by the legal product responsibility.

•Automatic switching devices provide comfort, but can also be dangerous. They can surprise people or can ignite clothing hanging over an electric heat source. Please be careful and take appropriate measures to avoid accidents.

How does Marmitek X-10 work?

Marmitek X-10 components use the existing mains wiring to communicate (using Marmitek X- 10 signals). You can build a complete system using the three different kind of components of the Marmitek X-10 System:

1.Modules: These components will receive Marmitek X-10 signals and will switch or dim the attached lamp or appliance.

2.Controllers: These components will transmit Marmitek X-10 signals and thus will control the Modules.

3.Transmitters: Wireless components like remotes. The signals of these components will be received by a controller with transceiver functionality (IRRF 7243, TM13 or console of a Marmitek Security System). The Transceiver will translate the signals into Marmitek X-10 signals on the power line.

Addresses

You can select up to 256 addresses by setting two code wheels on the modules. The two code wheels are dividing the address into a House Code ( A .. P) and a Unit Code (1 .. 16). On Controllers the House Code is also selectable. When Modules and Controllers are set to the same House Code they will work together.

The Marmitek X-10 System contains many standardized commands whereby modules set to the same House Code will respond simultaneously (e.g. All lights on, all off).

Signal Range

Range of Marmitek X-10 signals over the Power Line and how to increase the range. The Marmitek X-10 System is based on power line communication. The range of the Marmitek X-10 signals very much depends on the local circumstances. On average the range is a cable length of 80 meters.

If you have difficulties with the range of your Marmitek X-10 signals, please pay attention to the following facts:

ENGLISH

LM15TM

3