3. INSTALLATION OF THE IR TRANSMITTER

See figure 1.

 

1. Insert the supplied power adapter into the power socket

 

(230V-50Hz) and insert the power plug into the DC

 

input [E] at the backside of the IR transmitter. Use strictly

 

the supplied adapter!

 

2. Place the IR transmitter at a maximum distance of 6

 

meters form the A/V equipment (DVD player, decoder,

 

video, stereo, etc.) that you want to operate. Point the

 

front side (with the Marmitek logo) of the IR transmitter

Figure 1

at the A/V equipment.

 

Beware: It is important for the proper function of the system that the antenna wire [G] stays free and does not get covered by the metal cas- ing of e.g. A/V equipment.

4. INSTALLATION OF THE IR RECEIVER

See figure 3 and 4.

1.Open the IR receiver by sliding down the cover at the backside.

2.Place the 2 additionally supplied AAA 1.5V batteries into the IR receiver. Be careful about the polarity (+/-). This is indicated at the inside of the IR receiver. Use strictly non-rechargeable (Alkaline) batteries. Slide the cover back onto the IR receiver.

3.Place the IR receiver within the range of your remote control (maximum 6 meters). Make sure that the front side (with the Marmitek logo) is facing you.

The IR receiver can be moved freely due to the wireless technology. However, it is important to place it within the sight and range of your remote control. Experiment with its position for the best result.

Figure 3

Figure 4

4

© MARMITEK

Page 4
Image 4
Marmitek 20211, 20071102 user manual Installation of the IR Transmitter, Installation of the IR Receiver, See figure