USER MANUAL IRRF7243™ MINI CONTROLLER
TABLE OF CONTENTS
INTRODUCTION………………………………………………………………………….…… 6
1.PROPERTIES…………………………………………………………………………….…… 6
2.INSTALLATION MINI CONTROLLER………………………………………………... 7
3.SET UP OF REMOTE CONTROL…………………………………………………….. 7
3.1Operate via keyboard Mini Controller…………………………………….. 7
3.2Operating with the help of your infrared (IR) remote control……. 7
3.3 Control with the help of your RF remote control……… | 9 |
4.FREQENTLY ASKED QUESTIONS…………………………………………............... 9
5.TECHNICAL DATA……………………………………………...................................... 11
INTRODUCTION
Congratulated on buying the Marmitek X-10 IRRF7243 Mini Controller. With the Mini Controller you can operate your lighting and apparatus remotely. You can place the Mini Controller anywhere in the house where there is a plug. For instance in the living room or on your bedside table. You can switch on and off lighting and apparatus with your universal infrared (X-10 compatible) remote control, your X-10 RF (high frequent wall and floor penetrating) remote control or the keys of your Mini Controller. So you can switch off your children’s radio remotely or switch off your TV or night lamp in your bedroom. You can also switch on lighting, pressing one button, when you hear a suspected noise in the night or you can switch off all apparatus.
1. PROPERTIES
Marmitek X–10 commands can be given in different ways:
1.Directly with the built-in key board (inclusive ‘dim’, ‘all lights on’, and ‘all units off’ commands. You can operate max. 8 ‘X-10’ modules then. See chapter 3.1.
2.With a universal infrared remote control which is X–10 compatible. Depending on model: One for All, Philips Pronto, Thomson, Marmitek etc. See chapter 3 and 3.2.
3.With any Marmitek X–10 IRRF remote control. In this case the Mini Controller works as a Transceiver. See chapter 3 and 3.3.
