Marmitek M228 EX-228C DOME CAMERA PARTS INDICATION, EX-228C DOME CAMERA INSTALLATION, EX-228C DOME CAMERA SYSTEM SETUP

14 MARMITEK

ENGLISH

EX-228C DOME CAMERA PARTS INDICATION

1. Microphone

2. Connection wires

3. CCD camera

4. Microphone Sensitivity Adjustment

5. Mounting Screws

If the camera is mounted is a small enclosed area, adjust the microphone sensitivity to a lower

level.

The camera is connected by a 2 wire cable to the

Base Unit. Additional Dome Camera’s can be

connected to the terminals DR2/Cam1 or Cam2 or

Cam 3. There is no polarity.

• Press and hold the left button of the

Base Unit (7) for at least 2 seconds to

enter in the Setup mode. The Menu

appears on the screen.

• Step through the menu

by pressing the left (7)

or right (9) button of

the Base Unit. Select

the camera

corresponding with the

Terminal number where

the camera is connected to. Activate the camera by

pressing the middle button (8).

Pick up the Handset and replace it to end the Setup

mode.