Battery Replacement
1.To replace the battery, open the easily accessed coin screw battery cover plate by loosening screw as shown, then disconnect the battery connector lead.
2.Use PP3 or equivalent battery (for improved battery life use alkaline type)
3.Always ensure that the battery is removed when the pedal is not in use for long periods.
4.Dispose of old battery in a safe place.
Technical Specification
Power: 9V DC Centre Negative Regulated
Current Draw: 8mA
Controls: Blues/Boost Mode Select, Drive, Tone & Volume
Switches: On/Off Switch
Indicators: On/Off LED
Jacks: Input/Output ‘Jacksockets’
Input Impedance: 1MΩ
Output Load Impedance: max 25kΩ
Dimensions: 120mm x 65mm x 55mm
Weight: 510 grammes
6
